The Connected Electronics case features the 'TC' Aquaclip a wire-thru seal which is watertight allowing wires up to 2.5mm (1/10th inch) thick to be used with your equipment.
The greatest feature of the Aquapac is that you can use your device in the case!
Special Note: The use of AQUAPAC cases with Insulin Pumps
Aquapac have commissioned research by Imperial College London into the use of the 150 (Radio Microphone case) and 550 (Connected Electronics case) after receiving a large number of customer enquiries regarding their suitability for use with insulin pumps.
Results show that, in some circumstances, insulin flow rate can be reduced by the case.
In particular, low flow rates are impeded, and as such Aquapac can make no claim regarding the suitability of these cases with insulin pumps.
Use of these cases for insulin pumps is entirely at the discretion of the user.
Aquapac has been advised to recommend that users of Aquapac cases with insulin pumps regularly check their blood sugar levels.
Key Features:
Use your equipment normally in the case as sound and signal pass right through the material.
If using a stylus, it can be used normally through the clear window on the case.
The airtight seal means your equipment will float safely if you drop it in water.
CAUTION! We recommend the case for surface use only.
Not for submersion.
'TC' Aquaclip allows a wire of up to 2.5MM diameter out of the case
Tough vinyl construction
Supplied with detachable neck cord.
Length = 9.5 inches / 240mm
Width = 5.3 inches / 135mm
Maximum Circumference of unit that will fit = 10.5 inches / 270mm
The greatest feature of the Aquapac is that you can use your device in the case!
For ALL waterproof cases see product list and go to 'Waterproof Cases".